If you’re like most people, you rely on Windows to run all your applications. You update after a new release and then forget about it until the next time one is released. This leaves many programs without their files once Windows has been upgraded with an incompatible upgrade—a common complaint among users.
This article will give advice on how to fix this issue in real-time, preventing any downgrades or inconveniences caused by corrupted software files during upgrades of other versions of Windows operating systems that are still running.,
If you are having issues with Windows 10 not shutting down after upgrading, there may be a few solutions to fix the issue. The “windows 10 will not shut down completely power light stays on” is one of those solutions.
The upgrade is probably one of the nightmares for people who have had the first genuinely commercial Windows (Windows 98 onwards): the system now works and runs flawlessly, but will it continue to do so after the update? Legends of PCs that no longer start up after a simple update have vanished into the mists of time, necessitating a total formatting to get back up and running! Fortunately, things are completely different with Windows 10: updates are thoroughly vetted before being issued, and road accidents are very uncommon.
This does not rule out the possibility of an error occurring today: if we are among the unlucky users who find their PC locked after an update or that does not exit the update screen, we will show you how to get back up and running without having to resort to a dangerous disk formatting in this guide (now outdated, also given the new methods available on Windows).
READ ALSO -> Solutions if Windows does not shut down and the computer does not shut down properly
Restarting under duress
If our computer is stopped on the screen “Windows preparation does not turn off the computer“for more than an hour, it means that there is something wrong with the update procedure. In this case, in spite of the advice provided by the computer itself, we press the restart button on the fixed PC or hold it down for a few according to the power button, so as to obtain the Restarting under duress or shutdown.
If the issue was just temporary, we will see the same screen at the next system boot and will most likely complete the procedure (ideally within half an hour!). If the update screen remains stuck, we should wait at least an hour to rule out any major upgrades; if the system is still down, we may try one of the other options in the guide.
Remove the update that has been stuck.
If the PC refuses to start correctly due to a faulty update, we must force the system to restart three times in a row using the same tactics as in the previous chapter: this will launch the emergency recovery console, from which you may erase the pending update.
Press the Advanced settings button in the pop-up box that appears. To launch a prompt window, we press Troubleshooting, then Advanced Options, and finally Command Prompt.
We enter the following command at the prompt:
/cleanup-image /revertpendingactions dism /image:C:
To confirm, we hit Enter or Enter on the keyboard. Any outstanding updates will be removed, allowing you to reboot your machine immediately with no lock screens. Return to the first screen and choose Go on to leave the console.
When Windows starts again, it will most likely urge you to apply the update again: for the time being, we may avoid installing it by disabling Windows updates, but this is not advised (since Windows will update sooner or later anyway).
Repairing a startup
For computers stuck at startup, Microsoft has come up with an automatic recovery option, which can work even if there is a crash caused by an update. To proceed with the startup restore, open the recovery console (as seen in the previous chapter), press on Troubleshootingthen on Advanced options and finally on Repairing a startup.
The Windows diagnostic tool will launch immediately after clicking on the item; we do not need to do anything at this point but wait for the restoration of the settings required for the operating system to start correctly (it could take up to an hour). The system will resume after a few minutes of recovery efforts, and you will be able to use it without any restrictions.
Restore the system
If we have had the foresight to activate the Restore the system before the crash, we can immediately solve all our problems by returning to a known working Windows configuration. Restore the system often creates an image before the update, otherwise we will have to use one of the restore points we created.
To continue, we must restart the computer three times in a row, then choose Advanced options. Then, under Troubleshooting, we choose Advanced options again, and then System recovery.
On the new screen, tap the account on the PC, enter the password if required, and choose the restoration point to use in the recovery tool window. Your PC will be up and running again in a few minutes, with no problems during startup.
Windows 10 can be fully recovered.
If the procedures indicated so far are not successful and the system is still locked, there is no other choice but to try to restore Windows, keeping your personal files. To proceed in this sense we start the recovery console again (with three Restarting under duresss), press again on Troubleshooting and this time we click on Reset your PC.
We choose Keep personal files after hitting Reset your PC, and then accept the recovery procedure. In the most recent versions of Windows 10, you’ll be asked if you want to download the new version of Windows 10 from the cloud: we affirm this option, so you can keep your system up to date without having to download further updates.
We may also read our special guide to the Windows 10 recovery method; we remind you that on Windows, you can execute the restoration through system imageall legitimate techniques and alternatives to recovery shown above.
Conclusions
Updates on Windows have in fact become mandatory and there is nothing worse than seeing the system blocked due to a faulty update or not 100% compatible with our hardware. Fortunately, there is no shortage of tools to get back into operation immediately: the quickest is Restore the systembut only if we have already activated this function before the block.
Alternatively, the command to remove the pending update, the startup restoration, and, as a last resort, the whole Windows restore, which would destroy everything but personal data, may all be used.
On laptops, you may also try to fix the boot sector or system using the specialized restoration, a boot CD, or a Rescue Diskin.
If you are having trouble shutting down your computer after upgrading to Windows 10, there are a few steps that you can take to fix the issue. Reference: windows 10 not shutting down after update.
Frequently Asked Questions
How do you fix windows stuck on shutting down?
A: There is no way to fix this on your own, you will have to contact Microsoft Support.
Why is my Windows 10 not shutting down?
A: You might have a power or sleep issue. First, see if the computer is plugged in and receiving electricity by using an outlet tester to check for any issues with your current outlet. If you are still having problems, use this troubleshooting guide from Microsoft on how to fix Windows 10 hardware related errors
How do I fix Windows 10 Update and shut down?
A: You need to first uninstall the Windows 10 update, then download and install a fresh copy of Windows 10. Then you can shut down your computer normally.
Related Tags
- how to fix shutdown problem in windows 10
- windows 10 won’t shut down just restarts
- windows 10 hangs on shutdown black screen
- windows 10 20h2 shutdown problem
- windows 10 stuck on shutting down after update
